Product Details:
Payment & Shipping Terms:
|
CLASS: | 0.1 | RATIO: | 1000:1 |
---|---|---|---|
PRIMARY CURRENT: | 0-240A | SECONDARY CURRENT: | 0-240mA |
COLOR: | RED AND GREY | MATERIAL: | PC |
CABLE: | 2.5M | WEIGHT: | 420G |
PHASE SHIFT: | 30' | TYPE: | CLAMP ON CURRENT SENSOR |
The model XQ20 clamp on current sensor is suitable for 200A cable online measurement, the user friendly shape make It easily clamp onto cables or bus bars.
Electrical parameters | |
---|---|
Ratio | 1000: 1 or 2000:1 (customized) |
Accuracy class | 0.1%, 0.2% |
Primary current | 0 - 200A AC |
Secondary current | 0 - 200mA AC (customized) |
Max. Cont. Input current | 240A |
Load capacity | ≤4Ω |
Over voltage category | CAT III 600V |
Output signal (AC current) | From 0 to 200mA AC at nominal input current |
Output signal (AC voltage) | From 0 to 2V AC at nominal input current |
Frequency range | 40Hz-2000Hz |
Dielectric strength | 3KV 50Hz/60Hz at 1minute |
Temperature range | -20°C to +55°C |
Output | 2.5 meter cable with D01 connector |
Max. voltage not insulated conductors | 600 V |
Standard | EN 61010-1, EN 61010-2-032, IEC60044-1 |
Installation | Clamp type |
Output mode | Lead output(2.5m) |
Mechanical parameters | |
Dimensions (L x W x H) (mm) | 52.5 x 137.5 x 28 |
Weight (g) | 400 |
Holding wire diameter (mm) | φ20 |
Max. jaw opening (mm) | 20 |
Jaw color | Red, yellow, blue, green, black |
Material | PC+ABS+Polycarbonate, UL94 V0 |